EverSolo DAC-Z8 Digital to Analog Converter MQA Full Decoder HiFi DAC

Eversolo Z8 ES9038 PRO DAC USB XMOS XU316 HiFi Audio Decoder 32Bit 768Khz Decoding DSD512 Bluetooth 5.0 QCC5125 LDAC USB C AMP

Function Overview

• ESS flagship ES9038Pro 32-bit audiophile-grade D\A converter chip
• Third generation XMOS audio interface XU316 for higher performance and processing speed
• Dual clock management, low jitter dual clock synchronization processing, higher accuracy
• OPA1612*8 I/V op-amp network, 8-channel parallel signal compensation technology
• Up to support DSD512 Native, PCM768KHz@32Bit decoding
• Optical, coaxial, USB full support for MQA format full decoding and rendering
• Qualcomm QCC5125 Bluetooth 5.0 module, support APTX HD/LDAC protocol
• Fully balanced audio architecture, differential amplifier circuit design, professional tuning
• Large thrust high-performance ear amplifier output, to meet the 16-300 ohm headphone drive
• 3-inch color LCD display, support full format VU table display
• Low-ripple high-performance power supply module, to ensure a more pure power source
• Dedicated cell phone control APP, support cell phone global control

Specification
Model: Eversolo DAC-Z8
Display: 3-inch LCD display
Body material: aluminum alloy
Audio DAC: ES 9038Pro
Audio processor: the third generation XMOS interface XU316
Opamp: OPA1612*10
Power module: low-noise high-quality switching power supply
Bluetooth audio input: BT5.0, Qualcomm QCC5125 Bluetooth module, support SBC/AAC/aptX/aptX LL/aptX HD/LDAC
USB-B DAC input: compatibility: Windows (7, 10), Mac, Android, IOS system. Supports up to stereo DSD512, PCM 768KHz 32Bit, MQA format
USB-C DAC input: compatibility: Windows (7, 10), Mac, Android, IOS systems. Supports up to stereo DSD512, PCM 768KHz 32Bit, MQA format
Optical audio input: up to support stereo PCM 192KHz 24Bit, DSD64 Dop, MQA format
Coaxial audio input: up to support stereo PCM 192KHz 24Bit, DSD64 Dop, MQA format
Analog audio output: preamp output: XLR (balanced) + RCA; earphone output: 6.35mm single-ended
USB interface: USB2.0 * 1 (only upgrade use)
Control mode: remote control, cell phone APP control, knob control
Recommended headphone impedance: 16-300Ω (low gain mode: 16-32Ω / high gain mode 32-300Ω)
XLR output audio characteristics:

• Output level (Vrms): 4.1Vrms@0dBFS
• Total Harmonic Distortion (THD+N)@A-wt: 0.000062%@1kHz (-124dB@1kHz)
• Total Harmonic Distortion (THD+N)@No-wt: 0.000069%@1kHz (-123dB@1kHz)
• Bottom noise(Noise)@No-wt ：<1.2uVrms
• Signal-to-noise ratio (SNR) @No-wt : 133dB@1kHz
• Frequency response: 20Hz-20kHz(±0.1dB)
• Channel separation(CROSSTALK): -130dB@1kHz
• Dynamic range (DNR) @No-wt: 133dB@1kHz

RCA output audio characteristics:

• Output level (Vrms): 2.3Vrms@0dBFS
• Total Harmonic Distortion(THD+N)@A-wt: 0.000086%@1kHz(-121dB@1kHz)
• THD+N@No-wt：0.000097%@1kHz(-120dB@1kHz)
• Noise @No-wt: <1.5uVrms
• Signal-to-noise ratio (SNR) @No-wt: 126dB@1kHz
• Frequency response : 20Hz-20kHz(±0.1dB)
• Channel separation (CROSSTALK): -123dB@1kHz
• Dynamic range (DNR)@No-wt : 126dB@1kHz

• Output level (Vrms): 1.2Vrms@0dBFS
• Maximum undistorted power: 45 mW@32Ω
• Total Harmonic Distortion (THD+N)@A-wt: 0.00015%@1kHz(-116dB@1kHz)
• THD+N@No-wt：0.00018%@1kHz(-115dB@1kHz)
• Noise @No-wt: <2uVrms
• Signal-to-noise ratio (SNR) @No-wt: 124dB@1kHz
• Frequency response: 20Hz-20kHz(±0.1dB)
• Dynamic range(DNR) @No-wt：119dB@1kHz

Headphone output audio characteristics.
(high gain mode)

• Output level (Vrms): 2.8Vrms@0dBFS
• Maximum undistorted power: 26 mW@300Ω
• Total Harmonic Distortion (THD+N)@A-wt: 0.00016%@1kHz (-116dB@1kHz)
• THD+N@No-wt：0.00016%@1kHz(-116dB@1kHz)
• Noise@No-wt : <2uVrms
• Signal-to-noise ratio (SNR)@No-wt : 124dB@1kHz
• Frequency response : 20Hz-20kHz(±0.1dB)
• Dynamic range(DNR) @No-wt：124dB@1kHz

Power input: AC 110~240V 50/60Hz rated power consumption 9W
Body size: width 270mm * depth 187mm * height 50mm
Packing list: remote control * 1, power cord * 1, USB data cable * 1, user manual * 1